Change display format NO re-assignment statement required
This is a big 4x 1.2-inch LED module can display standard 4 digit with decimal or in format of clock / temperature. LED control is done over I2C using the HT16K33 interface.
Change the I2C address from a backside W0, W1 or W2 solder jumper. Jumper is shorted with solder, that sets the address. W0 sets the lowest bit with a value of 1, W1 sets the middle bit with a value of 2 and W2 sets the high bit with a value of 4. The final address is 0x70 + W2 + W1 + W0. For example, if W2 is shorted and A0 is shorted, the address is 0x70 + 4 + 1 = 0x75. If only W1 is shorted, the address is 0x70 + 2 = 0x72
Change the I2C address from a backside W0, W1 or W2 solder jumper. Jumper is shorted with solder, that sets the address. W0 sets the lowest bit with a value of 1, W1 sets the middle bit with a value of 2 and W2 sets the high bit with a value of 4. The final address is 0x70 + W2 + W1 + W0. For example, if W2 is shorted and A0 is shorted, the address is 0x70 + 4 + 1 = 0x75. If only W1 is shorted, the address is 0x70 + 2 = 0x72
Feature:
- DC 5v but 3v will work and LED will be dimmer
- Plug and Play display mode.
- Standard 4 digit or clock / temperature format
- 4-Digit 7-segment 1.2-inch LED
- 16-Step Software Dimming control
- I2C address selectable 0x70(default all-open) to 0x77
- Dedicated pin for I2C bus pull high Vcc
transformerX 1.2-inch 4-Digit 7-Segment LED Display I2C HT16K33 Clock-Temp. - RED
- Product Code: HT16K33-TX-R
- Availability: In Stock
-
$14.49